MicraLescer

MicraLescer are self-supporting, fluorocarbon resin bonded, borosilicate glass microfibre filter tubes. Designed to coalesce liquid droplets, they are suitable for use in gas and some liquid applications. Typical applications include two-phase separation e.g. oil and water aerosol from gases (or gas), oil from water and water from oil. The recommended direction of flow is from inside to out through the tube. This allows the high porosity outer layer to drain liquids from the filter by gravitational means. MicraLescers are supplied in sealed boxes of ten. Stainless steel support cores are available upon request.

MicraLescer offers : -

• Removal of sub-micron liquid droplets from gases
• Possibility of use on selected liquid/liquid separation application
• Integral drainage layer
• Model numbers printed on each MicraLescer for precise identification
  

  Efficiency, air & gas at 0.3µ

99.9998%

99.99%

99.50%

95%

  Efficiency, liquid 98% at

0.9µ

2µ

8µ

25µ

  Pressure loss - change filter

400 mbar (6 psi)

  Maximum temperature

150°C (300°F)

Ordering: add MicraLescer grade to model when ordering.
For example grade MCB tube, size 1232 = MCB-1232

[Grade]-1232

12

32

[Grade]-1257

12

57

[Grade]-2564

25

64

[Grade]-2172

25

127

[Grade]-2178

25

178

[Grade]-3152

38

152

[Grade]-5189

51

89

[Grade]-5230

51

230

[Grade]-5476

51

476

[Grade]-6762

63

762